Iron Foundation Paper Piecing Pattern

Free to print · Confident beginner · 17 pieces · 3 sections · 14″ block

Pattern diagram in the suggested fabrics. Every line is a seam.

A teal steam iron side on, nose to the left, with a sage band along the top, a steel soleplate with a white edge, a navy loop handle and a red dial, on butter yellow.

Open and print this pattern

Opens in the free FPP tool. Pick your fabrics and block size, then print or download the PDF. No account needed.

Finished size: 14″ × 14″
Prints at: 4 to 18″
Pieces: 17
Sections: 3
Smallest piece: about 1.3 sq in at 14″
Fabrics: 7
Skill level: Confident beginner
Price: Free, no sign-up
Using it: Use it for anything you sew, including quilts you sell. Please don't resell or repost the pattern itself; share a link to this page instead.

About this pattern

The Iron is a free foundation paper piecing (FPP) pattern from NiftyFifty: a 14-inch square block of 17 pieces sewn in 3 sections, using 7 fabrics, at a confident beginner skill level. It opens in NiftyFifty's free browser-based FPP tool, which prints mirrored foundations with 1/4-inch seam allowance at 4 to 18 inches. Every seam is a straight line, so the whole block is sewn with the flip-and-sew method.

Piece map

Letters are sections, numbers are sewing order. Dashed lines outline each section's foundation.

How to sew it

Open and printOpen the pattern in the free FPP tool, pick your fabrics and a block size (4 to 18 inches), and print or download the PDF. Print at 100% and check the 1-inch test square.
Cut the foundations apartCut each section's foundation apart just outside its dashed line. The dashed line is the 1/4-inch seam allowance.
Sew each section in number orderSew all 3 sections on the foundation, piece 1 first, then 2, 3 and on. Flip, press and trim the seam to 1/4 inch after each one. When a section is done, trim it on its dashed line.
4
Join the sections
- Join section A to section B along their shared straight seam.
- Sew section C to the A+B assembly along their shared straight seam.
Finish the blockPress, check that the block measures 14.5 inches square with seam allowance (14 inches finished), then tear the paper away.

Fabrics

Butter72% of the block, 6 pieces
Teal10% of the block, 4 pieces
Indigo6% of the block, 3 pieces
Slate4% of the block, 1 piece
Sage3% of the block, 1 piece
Snow White3% of the block, 1 piece
Ruby1% of the block, 1 piece

Suggested colors. The printed pattern lists rough-cut sizes for whatever fabrics you choose.

Choosing a block size

Smaller blocks mean smaller pieces. Under about half a square inch, pieces get fiddly, so this one is most comfortable at 9″ and up.

Finished block	Smallest piece
6″ × 6″	about 0.2 sq in
8″ × 8″	about 0.4 sq in
10″ × 10″	about 0.7 sq in
12″ × 12″	about 1.0 sq in
14″ × 14″ (as drafted)	about 1.3 sq in
16″ × 16″	about 1.7 sq in

A sewing tip for this block

The nose and the handle's front post sit on one slanted line. Check it with a ruler as you go so the iron doesn't end up looking bent.

What to make with it

Use it on a quilted cover for a tabletop pressing mat, an ironing board caddy, or a sewing room mini quilt.

Try it in other colors

A cherry red iron on pale aqua looks like it came straight out of a 1950s kitchen. Every fabric can be swapped in the FPP tool before you print.

Make it yours: every pattern is a starting point

These patterns are free and open to change. Think of each one as a starting point, not a finished rule: remix it into your colors, your size, your idea.

1Open itEvery pattern opens in the free FPP tool, no account needed.
2Change anythingSwap fabrics, change the size, move or add seams. The sewing order and sections update on their own.
3Save it as yoursSave your version to a free account and share it. Other quilters can then remix yours, credited to you.

Open and remix this pattern

Questions

What can I make with the Iron block?

Use it on a quilted cover for a tabletop pressing mat, an ironing board caddy, or a sewing room mini quilt.

Is this iron FPP pattern free?

Yes. The Iron pattern is free to open, recolor and print, and you don't need an account. It opens in NiftyFifty's free FPP tool, which prints the foundations or downloads them as a PDF.

Is the Iron block good for beginners?

It's a good second or third block: 17 pieces in 3 sections. If it's your very first, print it at a larger size so the pieces are roomier.

How many pieces and sections does the Iron block have?

17 pieces in 3 sections, using 7 fabrics. Each section is sewn on its own foundation, then the sections are joined along straight seams. The printed pattern numbers every piece in sewing order.

What size does it print?

It's drafted as a 14-inch finished block, and you can print it at 4 to 18 inches. At 14 inches the smallest piece is about 1.3 square inches; at 6 inches it's about 0.2 square inches.

Can I sell quilts I make from the Iron pattern?

Yes. Use it for anything you sew, including quilts you sell. Please don't resell or repost the pattern itself; share a link to this page instead.

Is there a PDF of the iron pattern?

Yes. The FPP tool downloads a PDF with a 1-inch test square, a color key, an assembly map, the sewing order and every foundation drawn at exact size with 1/4-inch seam allowance. Print it at 100%.

Can I change the colors?

Yes. Open it in the FPP tool, click a piece, then click a fabric: over 600 real Kona and Bella solids plus thousands of prints. You can also move seams or add new ones before you print.

More like this

Part of: Free Sewing Room Foundation Paper Piecing Patterns, Easy Foundation Paper Piecing Patterns for Beginners. Or browse all free FPP patterns.

Want to draw your own? The free FPP pattern maker turns any drawing into a printable pattern, and the Pattern Designer builds pieced blocks on a grid.